Removing Front Seat
NOTE:
Incorrect line routing
- Risk of damage to lines and hoses
- Malfunction and fault memory entry on control unit
→ Avoid small bending radii when routing lines.
→ File down edges and burrs in the routing area or mask them with adhesive tape.
→ Maintain a sufficient distance from components exposed to high temperatures while driving.
Information
When unlocking, make sure that none of the locking lugs break off.
- Remove seat rail cover.
- 1.1. Insert a narrow screwdriver -1- under the locking lugs and press upwards slightly.
- 1.2. Remove seat rail covers -2- on the left and right seat rails by pulling them towards the front.