Subsequent Work (Adaptive Seat With Air Cushion)

Information 

Different subsequent work is required, depending on the equipment variant.

1. Install wire harness for electrically adjustable seat at the seat frame. → INSTALLING WIRE HARNESS FOR POWER SEATS .
2. Install occupant detection control unit (passenger seat only for USA/Canada and Mexico vehicles). → INSTALLING OCCUPANT DETECTION CONTROL UNIT .
3. Install control unit for memory seat adjustment (only for seats without active seat ventilation).

   → Installing Control Unit For Memory Seat Adjustment  .

4. Remove front seat extension.
5. Install seat-belt buckle. → INSTALLING FRONT SEAT-BELT BUCKLE .
6. Install air cushion for seat. → Installing Air Cushion For Seat  .