Subsequent Work: Notes

Information 

Different subsequent work is required, depending on the equipment variant.

1. Install wire harness for electrically adjustable seat at the seat frame. → INSTALLING WIRE HARNESS FOR POWER SEATS .
2. Install occupant detection control unit (passenger seat only for USA/Canada and Mexico vehicles). → INSTALLING OCCUPANT DETECTION CONTROL UNIT .
3. Install control unit for memory seat adjustment (only for seats without active seat ventilation). → Installing Control Unit For Memory Seat Adjustment  - .
4. Remove front seat extension (only for seats with electric seat extension).
5. Install seat-belt buckle. → INSTALLING FRONT SEAT-BELT BUCKLE .
6. Install padding for front seat. → INSTALLING PADDING FOR FRONT SEAT .