LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (74 - Seat UPHOLSTERIES, Cover -- CARRERA (997)) >> WM 740919 Removing And Installing Suction Fan For Seat Surface (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Only for vehicles with weight sensing AWS (USA) on the passenger's seat.

  1. Install control unit for AWS. → INSTALLING AWS CONTROL UNIT

    Information 

    Driver's side only:

  2. Install control unit for memory seat adjustment. → INSTALLING CONTROL UNIT FOR MEMORY SEAT ADJUSTMENT
  3. Install the front seat. → INSTALLING FRONT SEAT
  4. Connect the battery. → 2706IN 00 WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY
  5. Perform function test on suction fan.
scientia non olet · About LEMON Manuals