Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Remove pressure pipe.
→ 214119 REMOVING AND INSTALLING PRESSURE PIPE .
Remove air cleaner housing.
→ 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING .
Lower the engine.
Lower the engine by max. 40 mm.
1. 3.1. Support the engine with a jack and retainer plate 9592 .
2. 3.2. Loosen collar nuts on engine mounting and unscrew. Carefully lower engine using the jack.