LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 635537 Disassembling And Assembling Rear Apron (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO) >> Subsequent work

Subsequent work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

  1. Install rear bumper overrider. → Installing rear bumper overrider .
  2. Install wire harness for number plate light. → Installing wiring harness for number plate light 
  3. Install number plate light. → Installing number plate light  . 

    Information 

    • Only for vehicles with ParkAssist. 
  4. Install sensor for ParkAssist. → Installing sensor for ParkAssist  . 
  5. Install rear apron. → Installing rear apron