LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 635537 Disassembling And Assembling Rear Apron (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO) >> Preliminary work

Preliminary work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear apron. → Removing rear apron 

    Information 

    • Only for vehicles with ParkAssist. 
  2. Remove sensor for ParkAssist. → Removing sensor for ParkAssist  . 
  3. Remove number plate light. → Removing number plate light  . 
  4. Remove wire harness for number plate light. → Removing wiring harness for number plate light 

    Information 

    • Only for USA/Canada vehicles. 
  5. Remove rear bumper overrider. → Removing rear bumper overrider 
scientia non olet · About LEMON Manuals