Installing Rear Center Panel: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Center Panel Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Observe installation position of seal for rear center panel to rear window.

Position rear center panel -2- .

Fig 2: Installing Rear Center Panel
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
By shifting the contours in relation to the side panel and rear lid, adjust the gap dimensions as required and tighten with the fastening screws -1- . Tightening torque → Tightening torque: 7.5 ft. lb. → WM 5000IN DIAGRAM - BODY GAP DIMENSIONS (ALL MODELS)
Retract rear spoiler.