LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (51 - Body Center, Roof, Frame - CARRERA (997)) >> WM 511155 Replacing Windscreen Frame (Except CARR. CABRIO, CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Turbo S CABRIO & Speedster) >> Subsequent Work >> Subsequent Work For Body Repairs

Subsequent Work For Body Repairs

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove vehicle from straightening bench
  2. Clean spot-welded joints and sheetmetal flanges with a wire brush
  3. Prime flange areas with 2K primer
  4. Restore standard sealing with body sealant

    → 5000IN SEAM SEALING

  5. Restore standard undersealing with underbody sealant

    → 5000IN UNDERSEALING

  6. Paint repair area and adjacent surfaces, if necessary
  7. Install any accessories you removed in the repair area
  8. Apply cavity preservation.
scientia non olet · About LEMON Manuals