LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (13 - Engine - CRANKGEAR, Pistons -- CARRERA (997)) >> WM 137619 Removing And Installing Pulley (Turbo Coupe, Turbo CABRIO, Gt3, Gt2, Gt3 RS) >> Preliminary Work >> Preliminary Work For 997 Turbo/GT2

Preliminary Work For 997 Turbo/GT2

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove pressure pipe.

    → 214119 REMOVING AND INSTALLING PRESSURE PIPE .

  2. Remove air cleaner housing.

    → 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING .

  3. Remove rear apron.

    → 635519 REMOVING AND INSTALLING REAR APRON .

  4. Remove rear silencer.

    → WM 263319 REMOVING AND INSTALLING REAR SILENCER .

scientia non olet · About LEMON Manuals