Subsequent Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the engine.
Raise the engine to assembly position using a retainer plate 9592 .
Screw in and tighten M12 collar nuts.
→ Tightening torque: 85 Nm (63 ft. lb.)
- Install fuel filter.
→ 206019 REMOVING AND INSTALLING FINE FUEL FILTER - section on "Installing"
- Install air cleaner housing.
→ 242419 REMOVING AND INSTALLING AIR-CLEANER ELEMENT - section on "Installing"
- Install pressure pipe.
→ 214119 REMOVING AND INSTALLING PRESSURE PIPE - section on "Installing".