LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (69 Occupant Protection/Personal Protection -- CARRERA (997)) >> WM 697755 Replacing Frame For Roll-Over Protection System (Speedster) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install wire harness for roll-over protection system. → Installing Rear Wire Harness
  2. Install relay carrier. → 979009 REMOVING AND INSTALLING RELAY CARRIER
  3. Install control unit for convertible top. → 619619 REMOVING AND INSTALLING CONVERTIBLE TOP CONTROL UNIT
  4. Install DME control unit. → 247019 REMOVING AND INSTALLING DME CONTROL UNIT
  5. Install roll-over bar.→ 697219 REMOVING AND INSTALLING ROLL-OVER BAR 
  6. Installing frame for roll-over protection system
scientia non olet · About LEMON Manuals