LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (69 Occupant Protection/Personal Protection -- CARRERA (997)) >> WM 697755 Replacing Frame For Roll-Over Protection System (Speedster) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove frame for roll-over protection system. → 697719 REMOVING AND INSTALLING FRAME FOR ROLL-OVER PROTECTION SYSTEM 
  2. Remove roll-over bar. → 697219 REMOVING AND INSTALLING ROLL-OVER BAR 
  3. Remove DME control unit. → 247019 REMOVING AND INSTALLING DME CONTROL UNIT
  4. Remove control unit for convertible top. → 619619 REMOVING AND INSTALLING CONVERTIBLE TOP CONTROL UNIT
  5. Remove relay carrier. → 979009 REMOVING AND INSTALLING RELAY CARRIER
  6. Remove wire harness for roll-over protection system. → Removing Rear Wire Harness
scientia non olet · About LEMON Manuals