LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (19 - Engine - Cooling -- CARRERA (997)) >> WM 195919 Removing And Installing Coolant Distributor Housing (Turbo Coupe, Turbo CABRIO & Gt2) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear silencer.

    → 263319 REMOVING AND INSTALLING REAR SILENCER .

  2. Install hydraulic pump with reservoir.

    → 489819 REMOVING AND INSTALLING HYDRAULIC PUMP .

  3. Install the generator.

    → 272219 REMOVING AND INSTALLING GENERATOR .

  4. Install oil-filter console.

    → 173319 REMOVING AND INSTALLING OIL-FILTER CONSOLE .

  5. Install air conditioning compressor.

    → 873419 REMOVING AND INSTALLING AIR CONDITIONING COMPRESSOR .

  6. Install air cleaner housing.

    → 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING .

  7. Install pressure pipe.

    → 214119 REMOVING AND INSTALLING PRESSURE PIPE .

  8. Connect the battery.

    → 2X00IN02 WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY .

  9. Fill in coolant and bleed the system.

    → 193817 DRAINING AND FILLING IN COOLANT (INCLUDES BLEEDING) .