Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery.
→ 2X00IN02 WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY .
Remove pressure pipe.
→ 214119 REMOVING AND INSTALLING PRESSURE PIPE .
Remove air cleaner housing.
→ 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING .
Detach and swivel out air conditioning compressor.
→ 873419 REMOVING AND INSTALLING AIR CONDITIONING COMPRESSOR .
Remove oil-filter console.
→ 173319 REMOVING AND INSTALLING OIL-FILTER CONSOLE .
Remove the generator.
→ 272219 REMOVING AND INSTALLING GENERATOR .
WARNING:
Hot fluid
- Danger of scalding
→ Let the fluid cool down.

→ Wear personal protective gear.
Drain coolant.
→ 193817 DRAINING AND FILLING IN COOLANT (INCLUDES BLEEDING) .
Remove hydraulic pump with reservoir.
→ 489819 REMOVING AND INSTALLING HYDRAULIC PUMP .
CAUTION:
Hot components
- Risk of burns
→ Let hot components cool down.

→ Wear personal protective gear.
Remove rear silencer.
→ 263319 REMOVING AND INSTALLING REAR SILENCER .