LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (19 - Engine - Cooling -- CARRERA (997)) >> WM 195819 Removing And Installing Coolant Regulator (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear silencer. → WM 263319 REMOVING AND INSTALLING REAR SILENCER - TURBO .
  2. Install charge-air cooler. → WM 214319 REMOVING AND INSTALLING CHARGE AIR COOLER
  3. Install rear apron. → 635519 REMOVING AND INSTALLING REAR APRON
  4. Fit drive belt. → 137819 REMOVING AND INSTALLING DRIVE BELT - TURBO
  5. Install air cleaner. → 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING - TURBO
  6. Fill in coolant and bleed the cooling system. → 193817 DRAINING AND FILLING COOLANT - TURBO (INCLUDES BLEEDING THE SYSTEM) 
scientia non olet · About LEMON Manuals