LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (19 - Engine - Cooling -- CARRERA (997)) >> WM 195819 Removing And Installing Coolant Regulator (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain coolant. → 193817 DRAINING AND FILLING COOLANT - TURBO (INCLUDES BLEEDING THE SYSTEM) 
  2. Remove air cleaner. → 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING - TURBO
  3. Release drive belt. → 137819 REMOVING AND INSTALLING DRIVE BELT - TURBO
  4. Remove rear apron. → 635519 REMOVING AND INSTALLING REAR APRON
  5. Remove charge-air cooler. → WM 214319 REMOVING AND INSTALLING CHARGE AIR COOLER .
  6. Remove rear silencer. → WM 263319 REMOVING AND INSTALLING REAR SILENCER - TURBO .
scientia non olet · About LEMON Manuals