Subsequent Work
- Install brake shoes. → Installing Parking-Brake Shoes .
- Install brake disc. → Installing Rear Brake Disc .
- Fit brake calliper. → Installing Rear Brake Calliper .
- Fit wheel.
→ Installing Wheel .
→ Installing Wheel With Central Bolt .
Information
If new brake discs and/or new brake shoes are installed on the vehicle, they must be worn in before calibration (not PCCB!). → 468350 GRINDING DOWN PARKING-BRAKE SHOES .
If a new actuator was installed, this must be confirmed in PIWIS Tester II 9818 .
- >>Control unit overview<< >>Parking brake<< >>Drive links/checks<< >>Confirm actuator replacement<<.
- Adjust, grind down and calibrate the electric parking brake (EPB) using PIWIS Tester II.