LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> 72 - Seat Frames -- 911 CARRERA (991) >> WM 723419 Removing And Installing Lumbar Support (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Preliminary Work

Preliminary Work

Information 

The lumbar support and air cushions must be deflated before removing the front seat.

  1. Remove front seat. → Removing Folding Sports Bucket Seat  .
  2. Remove cover for inner backrest. → Removing Cover For Inner Backrest  .
  3. First loosen  cover for front middle backrest, then fold it down  . → REMOVING COVER FOR FRONT MIDDLE BACKREST .
  4. Loosen cover for backrest. → REMOVING COVER FOR FRONT BACKREST .
    1. 4.1. Slide cover for backrest -1-  off the backrest shell -2-  at the bottom left and right, starting at the middle (-direction of arrow-  ) and disengage it.
      Fig 1: Disengaging Backrest Cover (Bottom)
      G09998231Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    2. 4.2. Loosen front cover piping -1-  at the sides  and carefully press it out of the backrest frame -2-  using a plastic wedge -3-  .
      Fig 2: Loosening Cover Piping
      G09998232Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Remove front side airbag (only for seats with adaptive lumbar support)  . → REMOVING FRONT SIDE AIRBAG .