LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers -- CARRERA (997) >> WM 635519 Removing And Installing Rear Apron (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2, Gt2 RS) >> Subsequent work

Subsequent work

  1. After fitting the rear apron, check heat protection shields for correct assembly, and correct if necessary. → 635019 REMOVING AND INSTALLING REAR BUMPER 
  2. Install the rear light. → Installing tail light  . 
  3. Install rear wheel housing liner. → Installing rear wheel housing liner .
  4. Check gap dimensions at rear, and adjust if necessary. → WM 5000IN Diagram - body gap dimensions 
scientia non olet · About LEMON Manuals