Installing Tail Light

Push the central connector for the tail light together until the connector engages securely.

Fig 1: Inserting Connector
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install tail light.

Fig 2: Installing Tail Light
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
1. 2.1. Slide the outside of the tail light into the holder at the side.
2. 2.2. Engage the inside of the tail light.
3. 2.3. Position the tail light according to the size of the gap and screw in the top fastening screw -1- first. → Tightening torque: 5 Nm (3.5 ftlb.)+10 %-15 %
4. 2.4. Tighten the bottom fastening screw -1- . → Tightening torque: 5 Nm (3.5 ftlb.)+10 %-15 %