Installing Wire Harness For Electrically Adjustable Seat
Information
Observe connector assignment!
Connect blue connector to the motor for fore-and-aft adjustment.
Connect white connector to the motor for front vertical adjustment.
Connect yellow connector to the motor for rear vertical adjustment.
Connector overview for wire harness for electrically adjustable seat
- Wire harness for control unit for memory seat adjustment - seat adjustment motors
- Wire harness for seat adjustment switch - control unit for memory seat adjustment
- Connector (grey) for control unit for memory seat adjustment (with memory only)
- Connector for seat adjustment motor
- Connector for motor for rear vertical adjustment
- Connector for motor for front vertical adjustment
- Connector (black) for control unit for memory seat adjustment (with memory only)
- Plug connections for seat adjustment switch
- Tie-wraps
- Route wire harness -B- and secure with new tie-wraps -7- .
- Push on connector -6- on seat adjustment switch until it engages firmly. → Installing Control Module Trim Panel - section on "Installing"
- Attach connector -5- to control unit for memory seat adjustment until it engages firmly. → Installing Control Unit For Memory Seat Adjustment - section on "Installing"
- Route the wire harness -A- .
- Attach connector -4- (white ) to motor for front vertical adjustment until it engages firmly. → Installing Motor For Front Vertical Adjustment - section on "Installing"
- Attach connector -3- (yellow ) to motor for rear vertical adjustment until it engages firmly. → Installing Motor For Rear Vertical Adjustment - section on "Installing"
- Attach connector -2- (blue ) to motor for seat adjustment until it engages firmly. → Installing Motor For Seat Adjustment - section on "Installing"
- Attach connector -1- to control unit for memory seat adjustment until it engages firmly. → Installing Control Unit For Memory Seat Adjustment - section on "Installing"