Front Seat Recliner Actuator Motor Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Power Recliner Motor & Position Sensor - Front Seat

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Disable the SIR system. Refer to SIR Disabling and Enabling . Remove the front seats. Refer to Driver or Passenger Seat Replacement . Remove the seat back cushion finish panel. Refer to Driver or Passenger Seat Back Cushion Finish Panel Replacement . Remove the head restraint. Refer to Driver or Passenger Seat Head Restraint Replacement . Remove the head restraint guides. Refer to Driver or Passenger Seat Head Restraint Guide Replacement . Remove the inflatable restraint front seat side module. Refer to Driver or Passenger Seat Side Inflatable Restraint Module Replacement . Remove the seat back cushion cover and pad. Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement . Remove the seat back side outer cover. Remove the seat back side inner cover.
1	Seat Recliner Position Sensor Remove the pivot rod retainer. Do not reuse retainer. Slide out the seat pivot rod out of the seat position sensor and recliner motor.
2	Seat Recliner Motor Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
3	Seat Recliner Motor