LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Driver or Passenger Seat Cushion Frame Replacement

Driver or Passenger Seat Cushion Frame Replacement

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Seat Cushion Frame Replacement
GM1574235Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the front seat. Refer to Driver or Passenger Seat Replacement .
  3. Remove the front seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement .
  4. Remove the passenger presence system on the passenger seat. Refer to Inflatable Restraint Passenger Presence System Replacement - Front .
1 Seat Cushion Frame Nut (Qty: 4)
CAUTION: Refer to Fastener Caution .

Tighten:  9 N.m (80 lb in)

2 Seat Cushion Frame