Seat Cushion Trim Cover and Pad Replacement

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Seat Cushion Trim Cover and Pad Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front seat. Refer to Driver or Passenger Seat Replacement .
1	Seat Cushion Cover Procedure Disconnect the seat cover J-channel from the seat cushion frame. Remove the seat cushion cover and pad as an assembly from the seat cushion frame.
2	Seat Cushion Pad Procedure Pull the seat cushion cover away from the seat cushion pad to disengage the retainers. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References .

Callout

Component Name

Preliminary Procedure:
Remove the front seat. Refer to Driver or Passenger Seat Replacement .

Seat Cushion Cover

Procedure

Disconnect the seat cover J-channel from the seat cushion frame.
Remove the seat cushion cover and pad as an assembly from the seat cushion frame.

Seat Cushion Pad

Procedure

Pull the seat cushion cover away from the seat cushion pad to disengage the retainers.
Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References .