Instrument Panel Lower Trim Panel Replacement (SKY)

Fig 1: Instrument Panel Lower Trim Panel, Screws & Retainer Clips

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the instrument panel (I/P) accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (SKY) . Remove the I/P compartment frame. Refer to Instrument Panel Compartment Door Opening Frame Replacement (SKY) . Remove the knee bolster assembly. Refer to Knee Bolster Replacement (SKY) or Knee Bolster Replacement (Solstice) .
1	I/P Lower Trim Panel Screw NOTE: Refer to Fastener Notice . Tighten: 2.5 N.m (22 lb in)
2	I/P Lower Trim Panel Assembly Procedures Disconnect the electrical connectors. When replacing the instrument lower trim panel, transfer all necessary components.
3	Retainer Clips (Qty: 6)