LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek V6-3.4L VIN E >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Headliner >> Service and Repair

Headliner: Service and Repair




Headlining Trim Panel Replacement

Tools Required

J 38778 Door Trim Pad Clip Remover

Removal Procedure

Caution: Do not attempt to repair or alter the head impact energy-absorbing material glued to the headliner or to the garnish trims. If the material is damaged, replace the headliner and/or the garnish trim. Failure to do so could result in personal injury.

1. Remove the windshield garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement (Windshield Pillar Garnish Molding Replacement).
2. Remove the sunroof switch, if equipped.
3. Remove the sunroof lace, if equipped.
4. Remove the sunshades. Refer to Sunshade Replacement (Sunshade Replacement).
5. Remove the overhead console, if equipped.
6. Remove the upper center trim panels. Refer to Center Pillar Upper Trim Panel Replacement (Center Pillar Upper Trim Panel Replacement).
7. Remove the upper quart trim panels. Refer to Quarter Upper Trim Panel Replacement (Quarter Upper Trim Panel Replacement).
8. Remove the rear upper garnish molding. Refer to Rear Upper Garnish Molding Replacement (Rear Upper Garnish Molding Replacement).
9. Remove the left and the right lamps from the roof side rail. Refer to Roof Side Rail Lamp Replacement .




10. Use J 38778 in order to remove the rear headliner push-in retainers.
11. Remove the headliner from the roof through the rear of the vehicle.

Installation Procedure

1. Install the headliner to the roof through the rear of the vehicle.
2. Push the headliner rearwards in order to lock the headliner into place.




3. Install the rear headliner push-in retainers.
4. Install the left and the right lamps to the roof side rail. Refer to Roof Side Rail Lamp Replacement .
5. Install the upper quarter trim panels. Refer to Quarter Upper Trim Panel Replacement (Quarter Upper Trim Panel Replacement).
6. Install the rear upper garnish molding. Refer to Rear Upper Garnish Molding Replacement (Rear Upper Garnish Molding Replacement).
7. Install the upper center pillar trim panel. Refer to Center Pillar Upper Trim Panel Replacement (Center Pillar Upper Trim Panel Replacement).
8. Install the sunroof switch.
9. Install the sunroof lace.
10. Install the overhead console.
11. Install the sunshades. Refer to Sunshade Replacement (Sunshade Replacement).
12. Install the windshield garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement (Windshield Pillar Garnish Molding Replacement).