Center Pillar Upper Trim Panel Replacement

Center Pillar Upper Trim Panel Replacement

Removal Procedure




1. Remove the upper seat belt guide loop attachment from the adjuster bracket. Refer to Driver or Passenger Seat Shoulder Belt Guide Adjuster Replacement .
2. Remove the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement (Center Pillar Lower Trim Panel Replacement).
3. Remove the upper center pillar trim panel from the center pillar, by pulling the upper center pillar trim panel to release the push-in retainers.

Installation Procedure




1. Align the upper center pillar trim panel to the center pillar.
2. Install the upper center pillar trim panel by applying pressure at all the retainers locations until fully seated.
3. Install the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement (Center Pillar Lower Trim Panel Replacement).
4. Install the upper seat belt upper guide loop attachment to the adjuster bracket. Refer to Driver or Passenger Seat Shoulder Belt Guide Adjuster Replacement .