Symptom Table
|
Symptom |
Probable malfunction location |
Inspection item |
|
|
Front wiper does not operate in... |
HI only |
|
Combination switch (wiper and washer switch) Refer to Symptom Table |
|
Front wiper motor (HI) circuit Refer to Component Function Check |
||
|
Front wiper request signal
|
BCM DATA MONITOR "FR WIPER HI" Refer to CONSULT Function (BCM - WIPER) . |
||
|
LO only |
|
Combination switch (wiper and washer switch) Refer to Symptom Table |
|
|
Front wiper motor (LO) circuit Refer to Component Function Check |
||
|
Front wiper request signal
|
BCM DATA MONITOR "FR WIPER LOW" Refer to CONSULT Function (BCM - WIPER) . |
||
|
AUTO only |
|
Combination switch (wiper and washer switch) Refer to Symptom Table |
|
|
Rain sensor Refer to Component Function Check |
||
|
HI, LO and AUTO |
SYMPTOM DIAGNOSIS "FRONT WIPER DOES NOT OPERATE" Refer to Diagnosis Procedure |
||
|
Front wiper does not stop in... |
HI only |
|
Combination switch (wiper and washer switch) Refer to Symptom Table |
|
Front wiper request signal
|
BCM DATA MONITOR "FR WIPER HI" Refer to CONSULT Function (BCM - WIPER) . |
||
|
IPDM E/R |
-- |
||
|
LO only |
|
Combination switch (wiper and washer switch) Refer to Symptom Table |
|
|
Front wiper request signal
|
BCM DATA MONITOR "FR WIPER LOW" Refer to CONSULT Function (BCM - WIPER) . |
||
|
IPDM E/R |
-- |
||
|
AUTO only |
|
Combination switch (wiper and washer switch) Refer to Symptom Table |
|
|
Rain sensor Refer to Component Function Check |
||
|
Front wiper does not operate normally in... |
Sensitivity adjustment cannot be performed. |
|
Combination switch (wiper and washer switch) Refer to Symptom Table |
|
BCM |
-- |
||
|
Auto wiping operation does not operate |
Check that the wiper setting is auto wiping operation Refer to CONSULT Function (BCM - WIPER) |
||
|
Wiper is not linked to the washer operation. |
|
Combination switch (wiper and washer switch) Refer to Symptom Table |
|
|
BCM |
-- |
||
|
Does not return to stop position. [Repeatedly operates for 10 seconds and then stops for 20 seconds. (Fail-safe)] |
|
Front wiper stop position signal circuit Refer to Component Function Check |
|
|
Rear wiper does not operate in... |
ON only |
|
Combination switch (wiper and washer switch) Refer to Symptom Table |
|
INT only |
|
Combination switch (wiper and washer switch) Refer to Symptom Table |
|
|
ON and INT |
|
Combination switch (wiper and washer switch) Refer to Symptom Table |
|
|
Rear wiper motor circuit Refer to Component Function Check |
||
|
Rear wiper does not stop in... |
ON only |
|
Combination switch (wiper and washer switch) Refer to Symptom Table |
|
INT only |
|
Combination switch (wiper and washer switch) Refer to Symptom Table |
|
|
Rear wiper does not operate normally in... |
Wiper is not linked to the washer operation. |
|
Combination switch (wiper and washer switch) Refer to Symptom Table |
|
BCM |
-- |
||
|
Rear wiper does not return to the stop position. [Stops after a five-second operation. (Fail-safe)] |
|
Rear wiper stop position signal circuit Refer to Component Function Check |
|
|
Washer motor does not operate. |
Washer motor does not operate when washing the windshield. |
|
Combination switch (wiper and washer switch) Refer to Symptom Table |
|
Washer motor circuit Refer to Diagnosis Procedure |
||