LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Automatic Transaxle (2 Of 2)) >> Removal And Installation >> CVT Oil Warmer System >> CVT Oil Warmer >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Do not remove the radiator cap when the engine is hot. Serious burns could occur from high pressure coolant escaping from the radiator. Wrap a thick cloth around the cap. Slowly turn it a quarter turn to allow built-up pressure to escape. Carefully remove the cap by turning it all the way.
CAUTION: Perform when the engine is cold.
  1. Remove front under cover. Refer to Removal and Installation .
  2. Remove CVT water hose inlet and CVT water hose outlet from CVT oil warmer. Refer to Exploded View .
  3. Remove CVT fluid cooler hose inlet and CVT fluid cooler hose outlet from CVT oil warmer. Refer to Exploded View .
  4. Remove CVT oil warmer bolts, then remove CVT oil warmer from vehicle.
scientia non olet · About LEMON Manuals