LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Brake Control System (W/ Intelligent Cruise Control) (2 Of 2)) >> DTC/Circuit Diagnosis >> Brake Warning Lamp >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK BRAKE WARNING LAMP FUNCTION (1) 

    Check that brake warning lamp in combination meter turns ON for 1 second after ignition switch is turned ON.

    CAUTION: Never start the engine.

    Is the inspection result normal?

    YES

    GO TO 2 .

    NO

    Proceed to Diagnosis Procedure .

  2. CHECK BRAKE WARNING LAMP FUNCTION (2) 

    Check that brake warning lamp turns ON/OFF when parking brake is operated.

    NOTE: Brake warning lamp turns ON when parking brake is operated (when parking brake switch is ON).

    Is the inspection result normal?

    YES

    GO TO 3 .

    NO

    Check the parking brake switch system. Refer to Diagnosis Procedure .

  3. CHECK BRAKE WARNING LAMP FUNCTION (3) 

    Check that brake warning lamp in combination meter turns ON/OFF when brake fluid level switch is operated while brake fluid level in reservoir tank is within the specified level.

    NOTE: Brake warning lamp turns ON when brake fluid is less than the specified level (when brake fluid level switch is ON).

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Check the brake fluid level switch system. Refer to Diagnosis Procedure .

scientia non olet · About LEMON Manuals