DTC Confirmation Procedure
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
If DTC CONFIRMATION PROCEDURE has been previously conducted, always perform the following procedure before conducting the next test:
- Turn ignition switch ON.
- Connect CONSULT, select "ENGINE" and perform "DEF System Leak Test" under "Active test".
- Check for DTC P208C-00 being current on the CONSULT screen.
Is DTC P208C-00 current?
YES
Proceed to Diagnosis Procedure .
NO
Inspection End.