Toe-In Adjustment

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Adjust the toe-in by varying the length of the steering outer socket.

Loosen the outer tie-rod lock nuts.

Adjust the toe-in by screwing the outer tie-rods in or out.

Courtesy of NISSAN NORTH AMERICA, INC.

Standard length (L)	: Refer to Steering Linkage - XD Models . Steering Linkage - Non-XD Models
Inner socket length (L1)	: Refer to Steering Linkage - XD Models . Steering Linkage - Non-XD Models
Possible amount of adjustment (L2)	: Refer to Steering Linkage - XD Models . Steering Linkage - Non-XD Models

Tighten the outer tie-rod lock nuts to specification.

Lock nut

: Refer to Exploded View .