LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Interior Lighting System) >> Symptom Diagnosis >> Interior Lighting System Symptoms >> Symptom Table

Symptom Table

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected.

Symptom

Possible cause

Inspection item

All of the following lamps do not turn ON

  • Front room/map lamp assembly (with front roof console) (if equipped)
  • Front room/map lamp assembly (without front roof console) (if equipped)
  • Personal lamp
  • Vanity lamps (if equipped)
  • Puddle lamps (if equipped)
  • Front foot lamps (if equipped)
  • Harness between BCM and each interior room lamp
  • BCM

Battery saver output/power supply circuit.

Refer to Diagnosis Procedure .

Some or all of the following interior room lamps do not turn ON/OFF

  • Puddle lamps (if equipped)
  • Front room/map lamp assembly (with front roof console) (if equipped)
  • Front room/map lamp assembly (without front roof console) (if equipped)
  • Personal lamp
  • Harness between BCM and each door switch
  • Harness between BCM and each interior room lamp
  • BCM

Door switch circuit.

Refer to Diagnosis Procedure .

Interior room lamp control circuit.

Refer to Diagnosis Procedure .

Cargo lamp, tailgate cargo lamps (if equipped) and bed lamps (if equipped) do not turn ON/OFF

  • Harness between BCM and cargo lamp relay
  • Harness between cargo lamp relay and cargo lamps
  • BCM
  • Cargo lamp relay

Cargo lamp control circuit.

Refer to Diagnosis Procedure .

Interior room lamp timer does not activate.

(It turns ON/ OFF when the door opens/closes.)

-

Check the interior room lamp setting.

Refer to CONSULT Function (BCM - INT LAMP) .

Interior room lamp battery saver does not activate.

BCM

Check the interior room lamp battery saver setting.

Refer to CONSULT Function (BCM - BATTERY SAVER) .

Push-button ignition switch illumination does not illuminate.

  • Harness between BCM and push-button ignition switch
  • BCM

Push-button ignition switch illumination circuit.

Refer to Diagnosis Procedure .