LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Front Suspension) >> Unit Removal And Installation >> Front Suspension Member >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine and transmission with front suspension member. Lift engine and transmission off suspension member. Refer to Removal and Installation .
    NOTE: Engine, transmission and suspension member must be removed as an assembly.
  2. If necessary, remove steering knuckles. Refer to Exploded View .
  3. If necessary, remove transverse links. Refer to Exploded View .
  4. If necessary, remove stabilizer. Refer to Exploded View .
  5. If necessary, remove steering gear and hydraulic lines. Refer to Exploded View .
scientia non olet · About LEMON Manuals