LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Rogue S, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator (Except Hybrid) >> System Description >> Diagnosis System (Combination Meter) >> Description >> Starting Combination Meter Self-Diagnosis Mode >> How To Initiate Self-Diagnosis Mode

How To Initiate Self-Diagnosis Mode

  1. Turn ignition switch OFF.
  2. While pressing the trip reset switch (1), turn ignition switch ON.
    G09157748Courtesy of NISSAN NORTH AMERICA, INC.
  3. Keep the trip reset switch for 1 seconds or more.
  4. Press the trip reset switch at least 3 times. (Within 7 seconds after the ignition switch is turned ON.)
  5. "Work instruction code" is indicated in the top portion of information display and self - diagnosis is started.
  6. The mode switches in the order shown below each time the trip reset switch is pressed.
NOTE:

If the trip reset switch is not operated for 20 seconds or more, the self - diagnosis mode is automatically cancelled.

Test order Test item Description
1 Work instruction code This item is displayed, but not used.
2 Part number
3 Software code
4 EEPROM code
5 Hardware code
6 P.C.B code
7 Circuit check The pointer of the following items moves from 0 to MAX twice.
  • Speedometer
  • Tachometer
  • Engine coolant temperature gauge
  • Fuel gauge
NOTE:

If any one of the pointers does not sweep, replace combination meter.
8 Color check* 1 Performs the color check of the information display.
9 error code* 2 Displays the error code of the following items:
  • Speedometer
  • Tachometer
  • Engine coolant temperature gauge
  • Fuel gauge
  • Meter control switch
10 Warning/indicator lamp check All warning/indicator lamp illuminate.
NOTE:
  • When either one of them does not turn ON, replace combination meter.
  • SRS air bag warning lamp and security indicator lamp are not illuminate.
NOTE:

When the trip reset switch is pressed during the indication of Test order "10," test item returns to Test order "2."

* 1: Color Check

GNSJSNIA5944ZZ-944Courtesy of NISSAN NORTH AMERICA, INC.
MARU-A-W Blue MARU-B-W Red MARU-C-W Pink
MARU-D-W Green MARU-E-W Light blue MARU-F-W Yellow
MARU-G-W White MARU-H-W White MARU-I-W Black
MARU-J-W Light blue MARU-K-W Black MARU-L-W Pink
MARU-M-W Black MARU-N-W Blue MARU-O-W Black
MARU-P-W Dark blue MARU-Q-W White MARU-R-W Blue

* 2: Error Code

GNSJSNIA5945ZZ-945Courtesy of NISSAN NORTH AMERICA, INC.
Item Code Description Action to take/Reference
MARU-A-W Speedometer 0 Normal -
1 A vehicle speed signal cannot be received from ABS actuator and electric unit (control unit). Perform "Self Diagnostic Result" of "ABS."
Refer to DTC INDEX .
2 A vehicle speed signal received from the ABS actuator and electric unit (control unit) is abnormal.
MARU-B-W Tachometer 0 Normal -
1 An engine speed signal cannot be received from ECM. Perform "Self Diagnostic Result" of "ECM."
Refer to DTC INDEX .
MARU-C-W Fuel gauge 0 Normal -
1 Fuel gauge circuit is short. Refer to COMPONENT FUNCTION CHECK .
2 Fuel gauge circuit is open.
MARU-D-W Engine coolant temperature gauge 0 Normal -
1 An engine coolant temperature signal cannot be received from ECM. Perform "Self Diagnostic Result" of "ECM."
Refer to DTC INDEX .
MARU-E-W Meter control switch 0 Normal -
1 When judging that the illumination control switch signal circuit is shorted for 5 minutes or more. Refer to DIAGNOSIS PROCEDURE .
2 When judging that the trip reset switch signal circuit is shorted for 5 minutes or more.
3 When judging that the both switch signal circuit is shored for 5 minutes or more.
MARU-F-W - 0 Displays "0" constantly. -
MARU-G-W - 0 Displays "0" constantly. -
MARU-H-W - 0 Displays "0" constantly. -
scientia non olet · About LEMON Manuals