LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Rogue S, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> Fuel Level Sensor Signal Circuit >> Component Function Check

Component Function Check

  1. COMBINATION METER INPUT SIGNAL

    1. Select "METER/M&A" using CONSULT.
    2. Select "FUEL METER" in "Data Monitor".
    3. Check the "FUEL METER" value and compare with the fuel gauge of the combination meter. Fuel gauge and Data Monitor indications should be close.
    Combination meter Monitor item
    Fuel gauge FUEL METER [L]
    (Approx.)
    Full 51.5
    3/4 39.6
    1/2 27.8
    1/4 15.9
    Empty 4.0

    Does the data monitor value approximately match the fuel gauge indication?

    YES 

    Inspection End.

    NO 

    Replace combination meter. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals