Water Pump Inspection
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the timing belt (see TIMING BELT INSPECTION ).
- Turn the water pump pulley counterclockwise, and make sure that it turns freely. If it does not turn freely, replace the water pump (see WATER PUMP REPLACEMENT
).NOTE: When you check the water pump, you may see a small amount of "weeping" from the bleed holes (A). This is normal.
- Install the timing belt (see TIMING BELT INSTALLATION ).