Symptom Troubleshooting Index
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
| Symptom | Diagnostic procedure | Also Check for |
|---|---|---|
| The BSI alert indicator comes on when no other vehicle is in the detectable area (Wrong indication) | Symptom Troubleshooting | |
| The BSI does not come on when other vehicles are in the detectable area (No indication) | Symptom Troubleshooting | |
| The BSI OFF switch does not work (USA models) | Symptom Troubleshooting | |
| The VSA/BSI OFF switch does not work (Canada models) | Symptom Troubleshooting | |
| The BSI indicator does not go off, or does not come on | Symptom Troubleshooting | |
| The BSI buzzer does not sound | Symptom Troubleshooting | |
| HDS does not communicate with the blind spot information system (BSI) | Symptom Troubleshooting | Incorrect HDS software |
| HDS does not communicate with the PCM or the vehicle | Symptom Troubleshooting DLC CIRCUIT TROUBLESHOOTING ) |
|