Detailed Flow

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CONFIRM SYMPTOM
Confirm symptom or customer complaint.

GO TO 2
CHECK SELF-DIAGNOSIS OPERATION OF COMBINATION METER
Perform self-diagnosis of combination meter. Refer to "DIAGNOSIS DESCRIPTION ".

Does self-diagnosis mode operate?

YES: GO TO 3

NO: Check power supply and ground circuit of combination meter. Refer to "COMBINATION METER: DIAGNOSIS PROCEDURE ". Then, GO TO 4
CHECK COMBINATION METER (CONSULT-III)
Select "METER/M&A" on CONSULT-III and perform "SELF-DIAGNOSIS" of combination meter. Refer to "CONSULT-III FUNCTION (METER/M&A) ".

Self-diagnostic results content

No malfunction detected: Repair or replace the cause of symptom. Then, GO TO 4

Malfunction detected: Refer to "DTC INDEX ". Then, GO TO 4
CONFIRM OPERATION

Does the combination meter operate normally?

Yes or No

YES: Inspection End.

NO: GO TO 1