DTC Index
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
DTC INDEX
| CONSULT-III display | Malfunction | Reference |
|---|---|---|
| CAN COMM CIRCUIT [U1000] | When combination meter is not transmitting or receiving CAN communication signal for 2 seconds or more. | XX-XX, "*****" |
| CONTROL UNIT (CAN) [U1010] | When detecting error during the initial diagnosis of the CAN controller of combination meter. | XX-XX, "*****" |
| VEHICLE SPEED [B2205] | The abnormal vehicle speed signal is input from the ABS actuator and electric unit (control unit) for 2 seconds or more. | XX-XX, "*****" |
| ENGINE SPEED [B2267] | If ECM continuously transmits abnormal engine speed signals for 2 seconds or more. | XX-XX, "*****" |
| WATER TEMP [B2268] | If ECM continuously transmits abnormal engine coolant temperature signals for 60 seconds or more. | XX-XX, "*****" |
NOTE:
"TIME" indicates the following.
- 0: Indicates that a malfunction is detected at present.
- 1-63: Indicates that a malfunction was detected in the past. (Displays number of ignition switch OFF → ON cycles after malfunction is detected. Self-diagnosis result is erased when "63" is exceeded.)