Fail-Safe Mode

WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

For fail-safe mode operating conditions, see Fig 1 .

Fig 1: Fail-Safe Mode Operating Conditions For TP Sensor

Courtesy of NISSAN MOTOR CO., U.S.A.

CAUTION: Always drive vehicle at a safe speed.

NOTE: If DTC confirmation test has been previously performed, always turn ignition off and wait at least 10 seconds before performing the next test.

NOTE: Perform appropriate DTC confirmation test according to DTC. See Figure . If DTC P0121 is detected, perform DTC CONFIRMATION TEST "B" first. If 1st trip DTC is not detected, perform DTC CONFIRMATION TEST "C" .