Diagnostic Procedure
WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK EACH SHIFT SOLENOID VALVE CIRCUIT
Perform "Diagnostic Procedure" for the following DTCs.
- "DTC P0750 SHIFT SOLENOID VALVE A" (Refer to DIAGNOSTIC PROCEDURE (DTC P0750) .)
- "DTC P0755 SHIFT SOLENOID VALVE B" (Refer to DIAGNOSTIC PROCEDURE (DTC P0755) .)
- "DTC P0760 SHIFT SOLENOID VALVE C" (Refer to DIAGNOSTIC PROCEDURE (DTC P0760) .)
- "DTC P0765 SHIFT SOLENOID VALVE D" (Refer to DIAGNOSTIC PROCEDURE (DTC P0765) .)
OK or NG
- OK : GO TO 2.
- NG : Repair or replace damaged parts.
- CHECK PRESSURE CONTROL SOLENOID VALVE A CIRCUIT
Perform "Diagnostic Procedure" for DTC P0745. Refer to DIAGNOSTIC PROCEDURE (DTC P0745) .
OK or NG
- OK : GO TO 3.
- NG : Repair or replace damaged parts.
- CHECK MALFUNCTIONING ITEM
- Control valve assembly. Refer to CONTROL VALVE ASSEMBLY .
- Disassembly A/T. Refer to DISASSEMBLY .
- Check the following item:
- B5 brake. Refer to TRANSAXLE CASE COVER & B5 BRAKE .
- U/D clutch. Refer to DISASSEMBLY .
- U/D brake. Refer to DISASSEMBLY .
OK or NG
- OK : GO TO 4.
- NG : Repair or replace damaged parts.
- CHECK DTC
Perform "DTC Confirmation Procedure". Refer to DTC CONFIRMATION PROCEDURE .
OK or NG
- OK : INSPECTION END
- NG : Replace the control valve assembly. Refer to CONTROL VALVE ASSEMBLY .