LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Combination Meter On-Vehicle Service - With Diagnostics) >> Symptom Procedures >> Check Procedure For Each Multi Information Display Screen - High Contrast Meter >> Other Screens

Other Screens

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

The screen displays the operation state of each system, periodic checkup timing, or timing for taking a rest during driving. If the screen display differs from the actual system operation state or if the screen is not displayed at the set timing, take measures according to the action procedure.

Display content Message Factor Action procedure
a
G09666942Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
4WD ECO Displayed in accordance with operation state of the 4WD switch.
  1. "4WD ECO" mode is selected.
  2. "4WD AUTO" mode is selected.
  3. "4WD LOCK" mode is selected.
If the 4WD switch position and screen do not agree with each other, perform the troubleshooting for the 4WD. Refer to TROUBLE SYMPTOM CHART .
b
G09666943Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
4WD AUTO
c
G09666944Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
4WD LOCK
G09666945Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
ROUTINE MAINTENANCE REQUIRED Displayed when the set period elapses. -
G09666946Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
REST REMINDER Displayed when the set time elapses. -