INSPECTION PROCEDURE 2: Uneven Body Clearance: Diagnosis

STEP 1. Check the clearance around the hood.
Q: Is the clearance around the hood even?
- YES: Go to Step 2.
- NO: Adjust the hood (Refer to ADJUSTMENT OF CLEARANCE AROUND HOOD < Except RALLIART > , ADJUSTMENT OF CLEARANCE AROUND HOOD < RALLIART > , and ALIGNMENT OF HOOD LATCH AND STRIKER < GTS >). Then go to Step 2.
STEP 2. Retest the system.
Q: Are the clearances between body panels even?
- YES: The procedure is complete.
- NO: Return to Step 1.