LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Hood - Lancer >> Alignment Of Hood Latch And Striker

Alignment Of Hood Latch And Striker

  1. Remove the headlight support panel cover (Refer to FRONT BUMPER ASSEMBLY & RADIATOR GRILLE - LANCER ).
  2. Loosen the hood latch mounting bolts but do not remove them. Move the hood latch up/down and left/right to align the hood level and adjust the hood striker engagement.
  3. After the adjustment, tighten the hood latch mounting bolts to 9.0 ± 1.0 N.m (80 ±9 in-lb).
  4. Install the headlight support panel cover. (Refer to FRONT BUMPER ASSEMBLY & RADIATOR GRILLE - LANCER .)
    Fig 1: Aligning Of Hood Latch And Striker
    G05384021Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals