Controller Area Network (Can) - Lancer
- General Information
- Special Tools
- Test Equipment
- Service Precautions
- Precautions On How To Repair The Can Bus Lines
- Explanation About The Scan Tool (M.U.T.-III) Can Bus Diagnostics
- Diagnostic Trouble Code Diagnosis
- Diagnosis
- Can Bus Diagnostics Table
- Can-Related Connector Position
- Can Bus Diagnostics
- DIAGNOSTIC ITEM 1: Diagnose when the scan tool cannot receive the data sent by ETACS-ECU
- DIAGNOSTIC ITEM 2: Malfunction of the ETACS-ECU
- DIAGNOSTIC ITEM 3: Abnormal short between the CAN-C bus lines
- DIAGNOSTIC ITEM 4: Diagnose shorts in the ground to CAN-C bus line
- DIAGNOSTIC ITEM 5: Diagnose shorts in the power supply to CAN-C bus line
- DIAGNOSTIC ITEM 6: Diagnose when the scan tool cannot receive the data sent by steering wheel sensor
- DIAGNOSTIC ITEM 7: Diagnose when the scan tool cannot receive the data sent by AWC-ECU.
- DIAGNOSTIC ITEM 8: Diagnose when the scan tool cannot receive the data sent by ASC-ECU
- DIAGNOSTIC ITEM 9: Diagnose when the scan tool cannot receive the data sent by shift lever.
) - DIAGNOSTIC ITEM 10: Diagnose when the scan tool cannot receive the data sent by TCM.
- DIAGNOSTIC ITEM 11: Diagnose when the scan tool cannot receive the data sent by transaxle assembly (TC-SST-ECU).
- DIAGNOSTIC ITEM 12: Diagnose when the scan tool cannot receive the data sent by ECM
- DIAGNOSTIC ITEM 13: Diagnose the lines between the ETACS-ECU and joint connector (CAN2)
- DIAGNOSTIC ITEM 14: Diagnose the lines between joint connector (CAN2) and joint connector (CAN3)
- DIAGNOSTIC ITEM 15: Diagnose the lines between joint connector (CAN3) and joint connector (CAN4).
- DIAGNOSTIC ITEM 16: Diagnose when the scan tool cannot receive the data sent by KOS-ECU.
- DIAGNOSTIC ITEM 17: Diagnose when the scan tool cannot receive the data sent by WCM.
- DIAGNOSTIC ITEM 18: Diagnose when the scan tool cannot receive the data sent by SRS-ECU
- DIAGNOSTIC ITEM 19: Diagnose when the scan tool cannot receive the data sent by A/C-ECU
or heater control unit - DIAGNOSTIC ITEM 20: Diagnose when the scan tool cannot receive the data sent by radio and CD player.
- DIAGNOSTIC ITEM 21: Diagnose when the scan tool cannot receive the data sent by CAN box unit
- DIAGNOSTIC ITEM 22: Diagnose when the scan tool cannot receive the data sent by hands free module.
- DIAGNOSTIC ITEM 23: Diagnose when the scan tool cannot receive the data sent by combination meter
- DIAGNOSTIC ITEM 24: Diagnose when the scan tool cannot receive the data sent by occupant classification-ECU
- DIAGNOSTIC ITEM 25: Diagnose when the scan tool cannot receive the data sent by satellite radio tuner
- DIAGNOSTIC ITEM 26: Short to power supply or ground in both CAN_H and CAN_L lines
- DIAGNOSTIC ITEM 27: Diagnose the ETACS-ECU, joint connector (CAN1) or lines between ETACS-ECU and joint connector (CAN1)
- DIAGNOSTIC ITEM 28: Short to power supply or ground, open circuit or line-to-line short in the CAN-B bus lines
- Can Communication-Related DTC (U-Code) Table