Installing the head restraint guide
NOTE:
TECHNICAL INFORMATION
The head restraint guides are not identical in construction.
The head restraint guides are not identical in construction.
- Ensure that the headrest guide (2) is installed on the left side with the lock for head restraint when facing the direction of travel.
- Insert the head restraint guides (2)
correctly from the top in the backrest frame (3)
.
The detents (1) must engage audibly.
Follow-up work
- Refer to INSTALL SUPPORT .
- Refer to INSTALLING THE HEAD RESTRAINT .
- Refer to INSTALLING THE BACKREST COVERING WITH THE CUSHION .
- Refer to INSTALLING SIDE AIRBAG ON FRONT SEAT .
- Refer to INSTALL THE TRIM AT THE BOTTOM OF THE APERTURE .
- Refer to INSTALL THE REAR PANEL ON THE FRONT SEAT BACKREST .
- Refer to INSTALLING THE OUTER COVER ON THE FRONT SEAT .
- Refer to INSTALL THE LEVER FOR SEAT HEIGHT ADJUSTMENT .
- Refer to INSTALL THE STEERING LEVER FOR BACKREST ADJUSTMENT .
- Refer to INSTALL THE COVER FOR BACKREST ADJUSTMENT .
- Refer to INSTALL INNER COVER .
- Refer to INSTALL FRONT SEAT .
- Refer to INSTALLING THE FRONT STRAP FITTING .