Installing the head restraint

• Correctly position the head restraint (2).
• Press the locks (1) and install the head restraint (2) in arrow direction.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Correctly position impact plate (1) on the support (3).
• Clip in impact plate (1) in the marked areas (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Impact plate to support
  Screw	Tightening torque	2.2Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALL THE TRIM AT THE BOTTOM OF THE APERTURE .
• Refer to INSTALL THE REAR PANEL ON THE FRONT SEAT BACKREST .