Installing the outer cover on the front seat

• Attach the retaining strap (1) in the outer cover (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in outer cover (3) into the guides (4) from front.
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Outer trim to front seat
  Screw	tightening torque	1.5Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screw (2) from the bottom.
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Outer trim to front seat
  Screw	tightening torque	1.5Nm

Follow-up work 

• Refer to INSTALL THE STEERING LEVER FOR BACKREST ADJUSTMENT .
• Refer to INSTALL THE LEVER FOR SEAT HEIGHT ADJUSTMENT .
• Refer to INSTALL THE COVER FOR BACKREST ADJUSTMENT .
• Refer to INSTALLING THE FRONT STRAP FITTING .